Spa Covers
East Coast Leisure
Deluxe Spa Covers
Spa Cover Lifts
Cover Colors
Energy Saver Covers
Walk-On Spa Covers
Valet Spa Cover Lifts
Jacuzzi Spa Covers
100% Nylon Zippers
Handles and Straps double "X" Stitched For Strength
4- Secure Locks With Key On Each Cover
Heat Seals Between Halves to Prevent Heat Loss
100% Coated Polyester Thread
Handles, Straps, and Hinges Are Reinforced With Extra Material
Safety warning labels are attached to all covers
All Bi-fold spa covers are classified manual safety covers by Underwriters Laboratories, Inc.® in accordance with
ASTM F 1346-91 95SJ
Handles, straps, and hinge reinforced with extra material
Handles and Straps double "X" Stitched For Strength
4- Secure Locks With Key On Each Cover
Heat Seals Between Halves to Prevent Heat Loss
100% Coated Polyester Thread
Handles, Straps, and Hinges Are Reinforced With Extra Material
Safety warning labels are attached to all covers
All Bi-fold spa covers are classified manual safety covers by Underwriters Laboratories, Inc.® in accordance with
ASTM F 1346-91 95SJ
Handles, straps, and hinge reinforced with extra material
Spa Hyde® Especially Formulated for Spa Covers
Fire retardent
Mildew and Chlorine Resistant
UV Stabilized For 1000 Hours On Weatherometer
Bottom Vinyl Is Chlorine and Bromine Resistant
All covers should be cleaned with a mild soap and warm water only. Petroleum based or any other harsh cleaners can damage the cover.
Our Fibre Reinforced Plastic (FRP) cover appears like our other covers in the fact that it is covered in a vinyl skin that is available in your choice of colors. The inside however is quite different. The panels are polystyrene that have been laminated with Fibre Reinforced Plastic sheeting to provide incredible strength and a protective layer against water absorption.
The FRP Spa Cover has a full five year warranty against breakage or water absorption
Sanders Industries Warranties that any person up to 300 pounds can WALK on this cover and it will not break
The vinyl skin on the FRP cover is warranteed for five years, two full years and the last three are pro-rated
Fire retardent
Mildew and Chlorine Resistant
UV Stabilized For 1000 Hours On Weatherometer
Bottom Vinyl Is Chlorine and Bromine Resistant
- 40F cold crack
All covers should be cleaned with a mild soap and warm water only. Petroleum based or any other harsh cleaners can damage the cover.
Our Fibre Reinforced Plastic (FRP) cover appears like our other covers in the fact that it is covered in a vinyl skin that is available in your choice of colors. The inside however is quite different. The panels are polystyrene that have been laminated with Fibre Reinforced Plastic sheeting to provide incredible strength and a protective layer against water absorption.
The FRP Spa Cover has a full five year warranty against breakage or water absorption
Sanders Industries Warranties that any person up to 300 pounds can WALK on this cover and it will not break
The vinyl skin on the FRP cover is warranteed for five years, two full years and the last three are pro-rated
All Spa Covers are constructed with vinyl especially formulated for spa cover use.
Available Colors
The new Cover Rx (cover prescription) is compatible with virtually any above-ground spa on the market today. The unique undermount installation plate allows the Rx to be installed on whatever side of your spa you choose and requires only 14" of clearance. Whether your spa is square, rectangular, octagonal, or round the Cover Rx will be a perfect fit and requires no drilling into your spa cabinet. Your spa cover is supported entirely by the Rx and does not place any unwanted stress on the center cover seam which translates to a longer cover life. The Cover Rx can be operated by a single user from any position you choose; from the side of the spa, from the back, or even inside of the spa. There has never before been a more complete spa cover lift.
Design by Pool Software, Inc. | www.poolsoftware.com | Copyright 2011 | East Coast Leisure Stores | Virginia Beach | Chesapeake | Newport News | Redmill