East Coast Leisure

« Back

When preparing to open your pool for the season, clean all leaves and other debris off the cover before removing it.
By emptying your skimmer baskets frequently, you'll help minimize the amount of leaves that end up on the bottom of your pool.
When cleaning the surface of your pool with a leaf net, work your way around the sides first, then clean from the middle of the pool to the sides.
Be sure to empty your leaf net occasionally when cleaning your pool's surface. Otherwise, the net's contents may accidentally end up back in the pool.
Keep the trees and shrubs around your pool trimmed back to minimize the amount of leaves and debris that end up in the pool.

When opening your pool at the beginning of the season, run your filter around the clock until the water is completely clear.
If your pool water appears green or has an unpleasant odor, the problem is probably caused by algae. Test for proper chlorine level, and consult a pool professional if the problem persists.
Keeping your filter, pump, lint trap and skimmer baskets clean and in proper working condition will help ensure that your pool water stays sparkling clear.
Pool inlets should be adjusted so the surface water is moving in a circular direction.
Make a habit of checking and emptying skimmer and pump baskets regularly.

To conserve energy, run your pool's filtration system only during off-peak hours.
When leaving for vacation for more than a week, turn off the pool heater, including the pilot light.
If you use your pool only on weekends, reduce your heater thermostats settings by eight to ten degrees during the week.
Use fencing, hedges or other landscaping, or cabanas to shelter your pool from prevailing winds.
According to the National Swimming Pool Institute and the American Red Cross, the most healthful swimming temperature is 78 degrees. Reducing your heater thermostat to maintain a 78 degree or lower temperature will also help conserve energy.
When reopening your pool for a new season, make sure your pump and filter are working properly before adding chemicals to the water.
If your pool heater is more than five years old, chances are a new high efficiency gas heater such as the MiniMax could quickly pay for itself in utility bill savings.
To obtain maximum filtration and energy efficiency, backwash or clean your filter regularly, as required.

An automatic pool cleaner will dramatically reduce the time spent on weekly maintenance.
If you fill your pool with well water, you'll need to add a metal remover.

When cleaning cartridge filters, soak them in a cleaning solution for 24 hours, then hose them off before reinstalling.
D.E. filters should be disassembled and cleaned at least once per season.
Is your sand filter 3-5 years old? If so, ask your pool professional if it's time to replace the sand.
If your filter pressure gauge indicates that pressure has dropped below the normal reading for a clean filter, check to see if you have a clogged pump or skimmer basket.
Cleaning your sand or D.E. filters when you close your pool for the season will ensure that they are ready for action when you open your pool the following summer.
To obtain maximum filtration and energy efficiency, backwash or clean your filter regularly, as required.

If your pool has a deck-mounted junction box, check the condition of the gaskets regularly--and replace as needed--to make sure the box cannot be penetrated by water.
When closing your pool for the season, coat all accessible o-rings, rubber fittings, and gaskets with a silicone O-ring lube to keep them from drying out.

To maintain your heater's heating efficiency, follow a regular program of preventive maintenance, including annual inspection and de-liming of the heat exchanger when necessary.

The addition of fiber optic or automated color changing lighting can dramatically enhance your nighttime pool enjoyment.

Turn the pool pump off before operating the multiport valve.
If your pump starts running louder or making unusual noises, shut it off and contact your pool professional.
If your pump motor hums but will not start, turn off the power and check to see if the impeller is clogged with debris.
Make a habit of checking and emptying skimmer and pump baskets regularly.

To prevent your skimmer basket from tipping over when the pump switches on or off, place a small weight or rock in the bottom (the weight must be larger than the suction pipe below the basket).
Check to make sure the skimmer weir is in place and is moving freely.
Make a habit of checking and emptying skimmer and pump baskets regularly.

Maintain your pool water level halfway up the skimmer box opening.
Normally, a pool should lose no more than 1/4 inch of water per day. If you notice a greater loss, suspect a leak.
Loose tiles or cracks in the pool deck may be an indication of a leaking pool.
Cracks and gaps in the bond beam may be an indication that your pool is leaking.
If you notice water-saturated soils in the area around the pool, pool pumps or plumbing, your pool may be leaking.
If you see bubbles in the return water when the pool's pump is running, it's likely there's a leak in the suction side of the filtration system.